ETi 200 Advanced Eddy Current Flaw Detector

The ETi-200 is an advanced Eddy Current Flaw Detector from ETher NDE. The ETi-200 is designed to offer advanced multi-frequency and multi-channel flaw detection housed in the smallest portable EC package on the market.

Appealing to all sectors within NDT, the ETi-200 allows the Operator to programme not only frequency, but many other advanced functions. With single-Probe operation, the ETi-200 can multiplex eight Channels, making the ETi-200 the most flexible portable unit available. Alternately with two Probes connected the ETi-200 allows any mix of eight channels across two Probes.

 

The ETi-200 not only excels in terms of technology, but has been designed to be rugged enough to cope with some of the on-site environments it will be undoubtedly exposed to. Built with a cast aluminium chassis overlaid with rubber over-moulding meeting IP54 standards, the ETi-200 is built to withstand the harshest of conditions.

As well as offering the Operator advanced technology and protective packaging, the ETi-200 weighs just 2.8kg (6.2lbs) with a compact footprint that has been ergonomically designed with the end-user in mind and providing an adjustable hand-strap and harness attachment points. 

The compact size of the ETi-200 does not mean that the screen has been neglected. The ETi-200 boasts an impressive 7” diagonal 800 x 480 pixel colour TFT display. All colours on the display are user-programmable incorporating feature friendly icons and the display can be presented in one, two or four panes.

Further technical advantages that the ETi-200 offers include:

  • Allowing USB peripherals (e.g. memory stick, mouse, keyboard)
  • Ethernet communication featuring a full-sized SD Card interface
  • “Smart Wheel” for rapid navigation through the ETi-200 features
  • “Direct Keys” to access key features quickly and easily
  • Embedded HELP text throughout the ETi-200 menus

  • Probe

    Modes 

    Lemo 00 for absolute probes and a 12 way Lemo connection for Reflection, Bridge and Rotary and Second Lemo 12 way for Reflection and Bridge Probes. Absolute and Bridge modes selectable at 50 or 100 ohm. 

    Test 

    Up to 8 channels with 12 user definable mixers 

    Frequency

    10 Hz-15 MHz in 0.01 increments per Hz, kHz or MHz range 

    Drive 

    0.10 - 20.00v pk-pk in 0.01v increments 

    Signal 

    Phase 

    0°-359.9° in 0.1° increments 

    Gain 

    Gain: -12.0 - +100 dB in 0.1 steps 

    X/Y Axis Spread 

    Any valid gain value on either channel. With lockable relative values. 

    Digitising Rate 

    36kHz max above 300kHz drive frequency 

    Filter 

    Band Pass, High Pass and Low Pass 

    Load 

    Automatic load selection for absolute probes with manual override. 8 values 1.3 uH to 470 uH 

    Display 

    Screen 

    7” 480 by 800 Pixel Colour TFT 

    Mode 

    Impedance (phase) plane display with strip chart or time base 1, 2 or 4 panes 

    Grid 

    Options of; None, 20% (5 by 5), 10% (10 by 10) and Polar 

    Spot Position 

    +/- 50 % in 1% increments 

    Persistence 

    Permanent and 0.01 -100.00 seconds in 0.1s increments 

    External 

    Standard 15 way d-type for external monitor, head up display or projector. 

    Alarm 

    Type 

    1 per channel selectable; Box or Sector 

    Setting 

    In increments of 1 % 

    Quantity 

    Action 

    Audio and / or signal freeze 

    Data Storage 

    Settings 

    Diverse options to internal ram drive, removable SD card (up to 32GB) or USB memory stick (up to 32GB). 

    Recording 

    Digitised data may be saved to internal memory (up to 32GB), external USB device or SD Card (up to 32GB). 1 GB of Internal Flash Memory. At a 25kHz processing rate, 1 minute of single channel data uses 11MB. 

    Data Output 

    Interface 

    USB (on the go), Ethernet, SD Card, VGA. 

    User Interface 

    Front Panel 

    Rotary control, cursor control, 18 push button keys. 4 Status LEDs 

    Software 

    Tabs, Soft Keys, Scrollable values, Direct data entry, will operate with USB Keyboard 

    Enclosure 

    Dimensions 

    20.0cm (7.9”) High x 22.5cm (9.0”) Wide x 7.5cm (3.0”) Thick 

    Weight 

     2.8 Kg (6.2 lbs) 

    Environmental 

    IP54 

    Temperature 

    Maximum Operating: 0 to 35oC 
    Recommended Storage: -20 to 70oC 

    Power 

    Internal Battery 

    Replaceable Li-Ion 14.4 v 5.5 hours max life 

    External AC 

    Power/charger 100-240 v 1.2A ac 50-60 Hz 90 Watts 

Standard ETi-200 Kit:

  • KIETI002

    Kit, ETi 200 - Two Channel, Eddy Current Flaw Detector. Including:

    IETI002

    Instrument, Eti 200-Two Channel, Eddy Current Flaw Detector, Multi Frequency 10Hz-15MHz, Gain 0-100db, Lemo 12-Way, Manual on USB Stick and Carry Strap

    AETI001

    Accessory, Hard Transit Case with foam inserts

    AETI002

    Accessory, ETi 200 AC Power Adapter (Class 1 Triangular Connector) Input:100-240V - 47-63Hz 1.2A MAX Output: 24V 3.75A

    A123

    LEAD, MICRO-B USB OTG (On the Go) Cable, 10cm.

    40357

    ETi Quick Reference Card

    AMXXX

    ACCESSORY, MAINS LEAD, 2m, Class 1 Triangular Connector, (Per Country of Destination)

    ALL12-L04-015R

    Accessory, Lead, Lemo 12-Way - Lemo 4-Way, 1.5m (Reflection) 

    ALL12-L04-015B

    Accessory, Lead, Lemo 12-Way - Lemo 4-Way, 1.5m (Bridge) 

    ALLCX-M02-015A

    Accessory, Lead, Lemo 00 to Microdot, 1.5m

    ALLCX-B02-015A

    Accessory, Lead. Lemo 00 to BNC, 1.5m

    AALCX-B02S

    Accessory, Adapter, Lemo00 to BNC Jack (Short) (Lemo 00 to BNC)

  • Common Accessories:

  • AM001

    ACCESSORY, MAINS LEAD, UK PLUG, 2m, 250V, 2.5A.(Class 1 Triangular Connector)

    AM002

    ACCESSORY, MAINS LEAD, EUROPEAN PLUG, 2m, 250V, 2.5A.  (Class 1 Triangular Connector)

    AM003

    ACCESSORY, MAINS LEAD, USA PLUG, 2m. (Class 1 Triangular Connector)

    AM004

    ACCESSORY, MAINS LEAD, AUSTRALIA PLUG, 2m. (Class 1 Triangular Connector)

    AM004

    ACCESSORY, MAINS LEAD, JAPAN PLUG, 2m. (Class 1 Triangular Connector)

  •  

    If you have any questions regarding the ETi-200 Eddy Current Flaw Detector, please feel free to contact a member of the team at sales@ethernde.com